| Color | : | Gray |
| Function Type | : | Heat Pump Riser |
| Height | : | 3 in |
| Load Capacity | : | 500 lb |
| Material | : | Polypropylene |
| Package Quantity | : | 48 Pack |
| Packaged Depth | : | 6.5 in |
| Packaged Height | : | 3.5 in |
| Packaged Width | : | 6.5 in |
| Shipping Weight | : | 0.329 lb |
HPR-3 is a one piece 3 in. gray heat pump riser that provides 3 in. of elevation under heat pumps, condensers, and air handlers. Heat pump risers are most commonly used to lift heat pumps above the snow line. This helps prevent damage to the coils caused by ice build up from drainage of condensate when operating in heat pump mode. Heat pump risers are available in 1 or 2 piece designs, multiple sizes and colors.
DiversiTech® Heat Pump Riser, 500 lb Load, 3 in Height, Polypropylene, Gray
- Provides the desired elevation for condensers, heat pumps, and air handlers
- Cost effective single piece design
- Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise
- Nestable design allows maximum shipping and storage density
- Sturdy design, four risers can handle up to 2,000 lb. uniform load
- Environmentally friendly, molded from recycled polypropylene material
- Unaffected by UV exposure or extreme weather